L-Series ACR with Coil Economizer
9112
Discontinued
Features
- This product has been replaced by the ML-Series Automatic Charging Relay
- Automatically combines battery banks during the charging cycle and isolates under discharge
- Activates whether the charging source is an alternator or battery charger
- Output for “ON” indicating LED
- Integrated coil control minimizes heating and amperage draw
- Hermetically sealed contacts
- Ignition protected—safe for installation aboard gasoline powered boats
- Single or dual sensing
- Pulse circuit requires very low current draw when contact is closed
- Designed for 12 or 24 volt systems
Documents
InstallationArticles 
Automatic Charging Relay - An Alternative to Multiple Output Charging Systems Battery Isolators and Automatic Charging RelaysProduct Certificates
PN 9112 (L-Series ACR with Coil Economizer) Instructions
Typical InstallationAutomatic Charging Relay - An Alternative to Multiple Output Charging Systems Battery Isolators and Automatic Charging RelaysProduct Certificates
Specifications
| Contact Form | SPST-NO |
| Input Voltage | 9-36V Maximum |
| Inrush Rating: 0.25 sec (10 repeats) | 2000A |
| Mechanical Endurance | 1.000.000 Cycles |
| Power Consumption - Holding | 0.13A @ 12-36V DC 0.07A @ 24V DC |
| Power Consumption - inrush max, 130ms | 3.80A DC |
| Terminal Stud Size | M8 (accepts 5/15" ring terminals) |
| Voltage Rating | 60V |
| Open High | 15.0V @ 12V 30.0V @ 24V |
| Relay Contact Position - Combine | 13.6V @ 12V 27.2V @ 24V |
| Open Low | 12.6V @ 12V 25.2V @ 24V |
Regulatory Specifications
  |
